Electrex MIG 304 BASIC Manual De Instrucciones página 20

- Press button 14 until the ARC AIR indicator lights up..
Compressed air
- Apply the electrode in the Arcair electrode holder.
- Verify that the compressed air flow from the Arcair electrode holder is directed to the workpiece.
35º
70/80º
Recommended angle for gouging
Recommended angle for cutting
- Switch on the machine, open the compressed air valve of the Arcair electrode holder. The machine is ready for
Arcair operations.
- For arc ignition, rest the electrode on the workpiece respecting the angles of incidence.
20