Publicidad
5 Operation
5.1 Unpacking and setting up
1. Take the tablet camera and power adapter out of the packaging and remove
the packaging sleeves
2. Remove the protective film from the display of the tablet
3. Undo the screws on the cover on the back of the camera and remove the
protective film underneath
4. Fit the tablet camera to the trinocular connection of the microscope
To do this you need a C-mount adapter, which fits the microscope you
are using. (For an example, see figure on page 12)
5. Connect the power supply using the power adapter
The power connector is located on the left on the underside of the tablet
11
ODC-2-BA-e-2211
Publicidad
