neno Perfertto Manual Del Usuario página 16

using the USB cable. The battery icon on the display will be full when charging is
complete.
Full blinking battery - low battery, connect the device for charging.
Incomplete blinking battery - battery connected for charging, current battery
charging status.
Full battery - a battery that is fully charged.
You can use the breast pump while the device is plugged in to charge. The device
battery will be charged when you connect the device to the power supply. The
device battery will not be charged when the pumping device is switched on. Fully
charge the breast pump battery before storing it if you intend not to use the device
for a long period of time. Charge the device battery before it is completely deple-
ted. This prolongs the life of the battery. If the breast pump has been
stored in a hot place, the device battery may not work at first. Allow the breast
pump to cool for one hour before use.
08. USE OF A BREAST PUMP
FIG. 5
1. Place the funnel on the breast so that the nipple is inside the drainage
channel.
2. Press the funnel and breast pump connector against your breast using your
thumb and index finger.
3. Support your breast with the palm of your hand.
4. Turn on the breast pump by pressing the power button and select the
operation mode that suits you.
5. Press the power button to turn off the breast pump after use and place the
lid on the funnel to protect the device from dust.
6. The breast pump starts in stimulation mode. Set the level of suction strength
comfortable for you using the +/- buttons. Stimulation mode - fast pumping
that mimics your baby's natural sucking of breast milk to stimulate milk flow.
After 2 minutes, the breast pump will automatically switch to deep pumping
mode. Adjust the level of suction using the +/- buttons to find the highest
level of suction that is comfortable for you. If milk starts to flow from your
breast before 2 minutes have passed, press the change mode button to
manually switch to deep milk extraction mode.
7. Deep pumping mode - slower pumping that gently and efficiently sucks milk
from the breast. In intake mode, increase the suction until you feel slight
discomfort (not pain) and reduce the suction by one degree.
8. Mixed mode - mimics your baby's sucking pattern by programming the
speed and strength of the suction. Can be used after pumping to help empty
the breast and increase lactation.
16