Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1
15
17
19
16
18
20
1. Control panel
15. PAUSE
18. VOLUME –
16. FREEZE
19. SOURCE
17. VOLUME +
20. POWER
9
23
24
26
9. Connection panel
23. HDMI
24. MIC 1
25. MIC 2
10
10. Power connector
3
8
21
22
8. Back panel
21. HDMI
22. DATA
28
25
27
26. MIC 1 GAIN
27. MIC 2 GAIN
28. Power socket
29
30
29. Power cable
30. HDMI cable
A
First time use
A.
Connect the power cable (29) to the Power
connector (10) on the back.
C
C.
Connect the other end of the HDMI cable (30) to
your computer HDMI port. Use adapter if necessary.
Artome starts automatically when it detects an
HDMI signal your from your computer. If necessary,
turn on the Artome from the Power button (20).
E
Adjusting image focus
Open the door (4) by pressing the top left front corner. The image focus adjustment lever is located behind the
hatch on the side of the projector. Push the locking mechanism forward to open the hatch. Adjust the image
resolution from the adjustment lever.
B
B.
Connect the HDMI cable (30) to the Artome
HDMI (23) connector.
D
Using Artome for speeches
Open the door (4) by pressing the door from the
upper left corner.
D.
Feed an XLR through the cable grommet (12)
and connect a dynamic microphone to MIC (24, 25)
connection. Mic input volume can be adjusted with
Mic gain controls (26, 27).
4
EN
4
Publicidad
