Platinet PTL44B Manual De Usuario página 4

EN
USER MANUAL PTL44B
Please carefully read this information before starting the installation or using this product.
Keep the installation instructions for future reference. Always pay attention to the technical
data found on the nameplate and in this installation manual.
Fig. 1.
Assembly and installation:
• Remove the lamp from the packaging.
• Before the first use, charge the lamp using a DC 5V charger and the provided USB-C cable. [Fig 1].
• While charging, a red LED on the lamp will be illuminated. After the charging is complete, a green LED
will light up. Disconnect the lamp from the charger.
• Gently press the ON/OFF button to turn on the lamp. [Fig2]
• The lamp has three lighting modes. Each press of the button activates a different mode.
A fourth press of the button will turn off the lamp.
• In each lighting mode, there is the possibility of stepless brightness adjustment.
Hold the button longer to increase or decrease the brightness of the light.
Safe usage:
• The lamp has an IP44 moisture protection rating, making it resistant to moisture and suitable for outdoor
use. However, do not immerse it in water. In case of immersion, contact the service center.
• Place the device on stable surfaces to prevent damage and ensure the safety of people and animals.
• Do not cover the lamp with fabrics or objects that may obstruct heat dissipation.
• Do not leave the lamp unattended during operation.
• Caution against looking directly at the LED light source, which can cause eye fatigue.
• Do not use the device in locations where the use of electrical equipment is prohibited or where it may
cause interference or other hazards. Adhere to all prohibitions, regulations, and warnings provided by the
facility staff where you intend to use the device. Do not use the device near flammable materials.
• The lamp is suitable for use in environments with temperatures ranging from 10°C to +45°C.
• Keep the lamp away from heat sources, such as radiators, to avoid deformation of plastic parts.
• The lamp is intended for private use only and is not suitable for commercial use.
Fig. 2.