Descargar Imprimir esta página

Black and Decker REVSV18D Traducido De Las Instrucciones Originales página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
ENGLISH
To remove the beater bar (9b) from the floor head (9) Slide
u
the beater bar release button (10) to the rear of the unit.
The beater bar (9b) can now be removed and cleaned.
u
Safe storage (Fig. O)
The unit can be safely stored, when not in use, by placing the
catch on the rear of the Main unit onto the storage station (14)
as shown in figure O.
Warning! When not in use position the unit with the rear of
the vacuum facing a wall so that any inadvertent fall of the unit
would contact a wall and not people or pets.
Troubleshooting
Problem
Possible Cause
Unit will not start.
Battery not installed
properly.
Battery not charged.
Battery will not charge.
Battery not inserted into
charger.
Charger not plugged in.
Surrounding air
temperature too hot or
too cold.
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
Switch off unit and remove the battery .
u
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
10
(Original instructions)
Possible Solution
Check battery
installation.
Check battery charging
requirements
Insert battery into
charger
until LED appears.
Plug charger into a
working
outlet. Refer to
"Important
Charging Notes" for
more details.
Check current at
receptacle
by plugging in a lamp
or other appliance.
Check to see if
receptacle is
connected to a light
switch which turns
power off when you
turn out the lights
Move charger and tool
to a surrounding air
temperature of above
4,5°C or below
+40,5°C.
Replacing the filters
The filters should be replaced every 6 to 9 months and when-
ever worn or damaged. Replacement filters are available from
your BLACK+DECKER dealer.
Remove the old filters as described above.
u
Fit the new filters as described above.
u
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical Data
Voltage
Watt Hours
Approx Charge Times
Weight
Charger
Input Voltage
V
ac
Output Voltage
V
dc
Current
mA
Approx. charge time
Hours
Battery
BDL1518
BDL1518E
Voltage
V
dc
Capacity
Ah
Type
Guarantee
Black & Decker is confident of the quality of its products and
offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area and te United Kingdom.
To claim on the guarantee, the claim must be in accordance
with Black&Decker Terms and Conditions and you will need to
submit proof of purchase to the seller or an authorised repair
agent.
REVSV18D Type 1
36Wh (18v 2.0Ah battery pack)
S010**2400040/SSC-250040**
100 - 240
8 - 20
400
5
BDL2018
BDL2518
BDL2018E
BDL2518E
18
18
1.5
2.0
Li-Ion
Li-Ion
18V
dc
5 hours
3kg
18
2.5
Li-Ion

Publicidad

loading

Este manual también es adecuado para:

Revsv18d1