LF MASTER FORGE 52606 Manual Del Usuario página 9

ASSEMBLY INSTRUCTIONS (CONTINUED)
4. Put the 20 lb. propane gas tank (not included)
into the tank holder (F). Turn the wing screw on
the outside of the tank holder (F) clockwise to
tighten the tank into the tank holder.
DANGER:
Propane tank must be a minimum of 60 inches
away from the unit at all times.
5. Turn the cylinder valve on the tank clockwise
to close the propane tank. Attach the
preassembled regulator from the body to the
cylinder valve by turning the regulator coupling
nut clockwise. Make sure it is fastened
securely and tighten connections by hand only.
WARNING:
Please inspect the rubber O ring in the propane
tank valve to ensure it is not worn before attaching
regulator. Worn rubber O ring can cause leaks,
explosions and serious injury by propane tank.
6. Cover body (B) with lid (A). To lock lid (A)
in place, turn clockwise. To unlock, turn
counterclockwise..
4
5
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
6
B
9
F
PRESSURE
RELIEF VALVE
CYLINDER VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
RUBBER O RING
LOCK UNLOCK
A