Sony BRAVIA KD-55X85K Guía De Configuración página 39

 Bring the Sound Bar and the
BLUETOOTH device closer together.
 Pair the Sound Bar and BLUETOOTH
device again. You may need to cancel
the pairing with the Sound Bar using
your BLUETOOTH device first.
 Pairing information may be deleted.
Perform pairing operation again
(page 26).
Sound of the connected
BLUETOOTH mobile device is not
output from the Sound Bar.
 Make sure that the BLUETOOTH
indicator on the Sound Bar is lit
(page 27).
 Bring the Sound Bar and the
BLUETOOTH device closer together.
 If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from the Sound Bar.
 Remove any obstacle between the
Sound Bar and the BLUETOOTH
device or move the Sound Bar away
from the obstacle.
 Reposition the connected
BLUETOOTH device.
 Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to 5 GHz range.
 Increase the volume on the
connected BLUETOOTH device.
Remote Control
The remote control of the Sound Bar
does not function.
 Point the remote control at the
remote control sensor on the Sound
Bar (page 8).
 Remove any obstacles in the path
between the remote control and the
Sound Bar.
 Replace both batteries in the remote
control with new ones, if they are
weak.
36
US
 Make sure you are pressing the
correct button on the remote control.
TV remote control does not work.
 This problem might be solved by
enabling the IR repeater function
(page 20).
Others
The Control for HDMI function does
not work properly.
 Check the connection with the Sound
Bar (refer to the supplied Startup
Guide).
 Enable the Control for HDMI function
on the TV. For details, refer to the
operating instructions of your TV.
 Wait a while, and then try again. If
you unplug the Sound Bar, it will take
a while before operations can be
made. Wait for 15 seconds or longer,
and then try again.
 Make sure the devices connected to
the Sound Bar support the Control for
HDMI function.
 Enable the Control for HDMI function
on the devices connected to the
Sound Bar. For details, refer to the
operating instructions of your device.
 The type and number of devices that
can be controlled by the Control for
HDMI function is restricted by the
HDMI CEC standard as follows:
– Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up to
3 devices
– Playback devices (Blu-ray Disc
player, DVD player, etc.): up to 3
devices
– Tuner-related devices: up to 4
devices
– Audio system (receiver/
headphones): up to 1 device (used
by the Sound Bar)
All the indicators flash quickly and
the Sound Bar is turned off.
 Disconnect the AC power cord (mains
lead) and make sure nothing is