With adult two-point seat belt
With adult three-point seat belt
n will
e any
On seats featuring: ISOFIX fastenings
afety
er is
ns to
orised
40-105cm
≤18kg
ce or
ective
make
A - When using as i-Size (40-105 cm).
child
This ECRS is suitable for use in
vehicles compliant with the ECE
i-Size
R14 requirements and with ISOFIX
d safe
installed.
utely
B - When using as i-Size (76-105 cm).
toy at
This ECRS is suitable for use in
vehicles compliant with the ECE
R14 requirements and with ISOFIX
installed.
ns for
C - When using as i-Size booster seat
traint
(100-150 cm).
hicle
This ECRS system is suitable for seat
e sure
belt models equipped with adult
tions.
three-point belts compliant with
dbook
the ECE R16 requirement and is not
seats
nts in
suitable for models only equipped
ndard.
with adult two-point seat belts.
(Please observe the regulations in force
in your country).
SOFIX
1. Facing backwards 40-105 cm:
ze
Do not use on passenger seats with
an active front airbag!
2. Facing forwards 76-150 cm:
eat as
If there is a passenger airbag: slide the
passenger seat all the way back and fol-
low the relevant instructions provided
Yes
B-C
in your vehicle handbook, making sure
Yes
A
that the airbag is deactivated.
R398_POLARIS_(C 07)_Libretto_v3.indd 21
R398_POLARIS_(C 07)_Libretto_v3.indd 21
76-150cm
INSTALLATION
No
Yes
C
1. If your vehicle is not equipped as
Yes
A-B-C
standard with ISOFIX Insertion Aids,
clamp the two ISOFIX Insertion
Aids (1), which are included in the
scope of delivery of the seat, with
the opening pointing upwards, to
the two ISOFIX Fastening Points (2)
of your vehicle. If you do not have
the ISOFIX Insertion Aids (1), please
ignore this step.
TIP!
The ISOFIX fastening points
are located between the surface and
the backrest of the vehicle seat.
2. Press the ISOFIX Buttons (26) to
push out the two ISOFIX Locking
Arms (25) from the seat base.
3. Push back the child safety seat
until you hear a clicking sound and
the green safety colour shows on both
sides of the ISOFIX indicators.
4. Move the child safety seat
backwards so that it rests firmly
against the seat of the vehicle.
TIP!
Release the button towards
the other side to loosen the ISOFIX
fastening points on both sides. By
placing the ISOFIX locking arms
back into the seat base, the ISOFIX
can be protected.
2. TOP TETHER
1. Pull out the top tether strap by
pressing the Top Tether Adjuster (23)
button.
2. Pull the top tether long enough to
hang the Top Tether Clip (24) on the
fixed point, which is on the back of the
vehicle seat.
21
1. ISOFIX
22/12/23 09:36
22/12/23 09:36