Descargar Imprimir esta página

Giordani POLARIS Manual De Instrucciones página 22

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28
3. Make sure the top tether strap
is tightened and the Top Tether
Adjuster (23) indicator turns green.
1. Pull the 360° Rotation Adjuster
(11) with one finger and rotate the
seat shell.
2. Rotate the seat shell so it is facing
either for wards or backwards,
depending on the height of your
child, until it engages with a clicking
sound.
TIP!
when installed in the forward-facing
position with ISOFIX and top tether
(76-105 cm).
DANGER!
to 90°, the user can place the child in
this position, but the user cannot use
this angle while driving.
The seat shell of the C007 i-Size can be
used in 4 level positions when facing
forward and in 4 level positions when
facing rearward.
1. Pull the Recline Handle (12), then
pull the seat outward to adjust it.
It can be adjusted to 4 positions for
forward facing use.
By rotating the seat in the rearward
direction, the seat can be adjusted to the
fifth to eighth level.
40-87 cm: for rearward-facing installa-
tion, use fifth level to eighth level.
87-105 cm: for rearward-facing installa-
tion, use fifth level.
76-105 cm: for forward-facing installa-
tion, use fourth level.
R398_POLARIS_(C 07)_Libretto_v3.indd 22
R398_POLARIS_(C 07)_Libretto_v3.indd 22
3. ROTATION
Rotation may be limited
When the seat is rotated
4. SEAT ANGLE
100-150 cm: for forward-facing installa-
tion, use first level.
TIP!
In models from 76 to 105 cm,
the ECRS may not be suitable for all
vehicles; the reclining angles may
not match the vehicle seat during
adjustment.
5. USE
1. Loosen the Shoulder Straps (6) by
pressing the Adjustment Botton (9)
and pull both Shoulder Straps (6)
forwards, loosening them as much as
possible.
2. Press the Red Release Button (18)
to open the Harness Buckle (7) and
attach the Buckle Tongues (17) to the
Elastic (28) on both sides of the fabric
cover. Place your child in the child
safety seat.
3. Bring both Buckle Tongues (17)
together. Lock the buckle tongues
in the Harness Buckle (7) until they
engage with a clicking sound.
4. Pull the Headrest Height Adjuster
(19), select the correct height of
the Headrest (3) and engage it in
a position that fits your child by
releasing the adjuster.
5. Adjust the Headrest (3) to the
correct position. Make sure that
there is less than a finger's distance
between the child's shoulder and
the bottom of the headrest. Pull the
Groin Strap (10) until it lies flat and
snug on your child's body. Make sure
the shoulder straps are slightly higher
or at the same height as the child's
shoulders.
WARNING!
22
Before each car
journ
child'
• The
the
both
Arm
Butt
• The
faste
• The
seat
with
not
• The
corr
not
• The
corr
bod
• The
righ
size
• The
into
DAN
the IS
butto
or as s
the c
fasten
is pro
child
or her
TH
Once
100 c
shoul
shoul
22/12/23 09:36
22/12/23 09:36

Publicidad

loading