Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS
• When using, maintain adequate visibility below a height of 2m in the presence of the public.
• Fog or smoke can trigger fire detection systems.
MAINTENANCE / SERVICE
• Never attempt to disassemble, repair or modify the unit yourself. Otherwise, the warranty becomes void. Repairs by
unqualified persons may result in damage or malfunction. Please contact the nearest authorized service center. The light source
contained in this fixture should only be replaced by the manufacturer or its service agent or a person of equivalent qualification.
• Screens, lenses or UV filters should be replaced if they are visibly damaged to an extent that compromises their
effectiveness, such as by deep cracks or scratches.
• The lamp should be replaced if it has been damaged or deformed by heat. Disconnect the unit from the mains before servicing.
• If the cable or flexible outer cord of this fixture is damaged, it must be replaced with a special cable or cord from the
manufacturer or its service agent only.
• Never immerse the unit in water or any other liquid. Wipe only with a slightly damp cloth.
CONNECTORS AND CONTROLS
1
2
3
4
5
6
1
Mains power supply switch
2
Wireless system antenna
3
XLR 3 pins DMX IN connector
4
XLR 3 pins DMX OUT connector
5
Fuse
6
POWER IN connector
7
LCD display with control panel
8
Wireless DMX receiver
9
POWER OUT connector (you can connect here one more VULKAN PRO only)
10
Security hook for safety cable
WIRELESS
DMX
P.14
7
8
9
10
Publicidad
