devices cause darkening of the above-mentioned parts. parts. It is recommended to wash
them by hand, using traditional dishwashing liquids.
33. To avoid overheating the device, do not cover the device.
34. Do not store anything in the device other than accessories belonging to it.
35. Do not use the device with an open container.
Do not touch the hot surfaces of the device
WARNING: The device is equipped with a delayed start function, but it is
recommended to use it only when the user is at home and the device is under
supervision.
Device description:
1. Control panel
2. Transparent window
3. Air outlet
4. Housing
5. Grate
6. Handle
7. Power cord
8. Container
Control Panel:
A:: Start / Cancel button
B: Function selection
C: Temperature/time adjustment buttons
D: Delayed start button
E: Fan operation indicator
F: Temperature and time display
G: "-" button
H. "+" button
Programs:
1. Chicken wings 2. Sausage 3. French fries 4. Egg tart 5. Pizza 6. Sweet potatoes 7. Chicken legs 8. Shrimp 9. Steak
10. Fish 11. Cake 12. Peanuts
Before first use.
1. Remove the packaging and all stickers and accessories on the outside and inside of the device.
2. Thoroughly clean the grate (5) and the container (8) with hot water, a small amount of dishwashing liquid, and a sponge, and then wipe
them with a clean, soft cloth
(Do not clean the device with abrasive cloths or sponges, or use cleaning powders, as they may damage the smooth, non-stick surface of
the basket and container)
3. Put the oven body (4) on a stable horizontal surface, connect the power cord, and select the first program (see the section on using the
device) to remove factory odors from the device.
4. When the program is finished, unplug the power cord and repeat step 2 to clean it again after it has cooled down completely.
Do not wash the grate (5) and the container (8) in the dishwasher.
Device use:
1. Holding the handle (6), pull the container (8) together with the grate (5) out of the body (4) and place it on a stable surface.
2. The grate (5) can be removed from the container (8).
3. Place the previously prepared products on the grate (5) located at the bottom of the container (8). Then insert the container (8) into the
body (4). When filling the container, do not exceed the MAX level inside.
4. Connect the closed device to a grounded power socket.
5. The device will turn on and emit an audible alarm. If no program is selected, the device will go into standby after 1 minute. To turn the
5