PAJ GPS VEHICLE Finder 4G 1.0 Manual Del Usuario página 16

2.4 Connection to vehicle
Please note the following points, before connecting to the vehicle:
• SIM card already placed in the VEHICLE Finder 4G 1.0
• The VEHICLE Finder 4G 1.0 should not be attached to gasoline lines or other
flammable components
• No other components on your vehicle should be damaged by the attachment
• By installing the VEHICLE Finder 4G 1.0 on the vehicle battery, it is possible that
this will be discharged to power the VEHICLE Finder 4G 1.0. If you regularly use
your vehicle, this should not be a problem with a functioning battery, as it is cons-
tantly recharged by driving. If this is not the case, please check before connec-
tion whether your battery has a discharge protection and, if necessary, retrofit
this. In idle state, the FINDER requires about 10-20 mAh
NOTE!
Please always observe the manufacturer's specifications for your
vehicle. Claims for damages for improper connections are excluded.
30
2.5 Installation
1.
2.
Mount the FINDER with the help
of the adhesive strip in the engine
compartment
Connect the FINDER to the battery.
Connect the red cable with the fuse
PLUS (+). Connect the black cable
to
to Minus (-)
31