PAJ GPS VEHICLE Finder 4G 1.0 Manual Del Usuario página 17

NOTE!
By connecting to the power supply, the FINDER turns on immediately and the
LED lights give a signal. If the device is not connected to the vehicle battery but
to another location (e.g., fuse box), this may cause the ignition on/off function
to be not accurately recognized.
-
+
WARNING!
The poles must not be swapped under any circumstances.
2.6 Start-up
If the activation was successful, you can start the VEHICLE Finder 4G 1.0.
When connected to the power supply, the FINDER will switch on.
NOTE!
After you have successfully installed the VEHICLE Finder 4G 1.0 in your vehicle,
it is advisable to move the vehicle for some time. For example, drive the car
briefly to go shopping. This allows the device to log into the correct network
faster and establish a first connection.
32
Black cable
-
Battery
9-75 V
+
Red cable
2.7 Use
As soon as your device has been successfully activated, started up and has sent
and logged data for the first time, you can place it wherever you choose and use
your phone, tablet or PC to start tracking it! You will be able to do this in our App
or enter the following link to the desktop version:
v2.finder-portal.com
33