Publicidad
Google Naredbe:
Sada možete upravljati svojim pametnim uređajem pomoću glasovnih naredbi Google Home.
Ispod je navedeno nekoliko primjera naredbi o tome kako koristiti Google Home uređaj:
!
OK Google, uključi Smart Plug
!
OK Google, isključi Smart Plug
PRIJE POČETKA INSTALACIJE NEMOJTE ZABORAVITI:
1. Aplikacije V-TAC Smart Home & Google Home,
2. Provjerite da li imate uređaj Google Home,
3. Smart Home uređaj,
4. Stabilnu Wifi mrežu.
SAFETY INSTRUCTION
STEP ①: AFTER TAKING OUT THE NEW LAMP HOLDER, FIRST CHECK WHETHER THE PARTS OF THE LAMP HOLDER ARE INTACT, AND
INSTALL IT IF THERE ARE NO PROBLEMS.
STEP ②: BEFORE INSTALLATION, YOU NEED TO TURN OFF THE ELECTRIC POWER, THEN CLEAN THE OLD LAMP HOLDER AND TIGHTEN
THE NEW LAMP HOLDER CLOCKWISE. DO NOT USE EXCESSIVE FORCE WHEN TIGHTENING TO AVOID DAMAGING THE SCREW.
STEP ③: AFTER SCREWING, CHECK WHETHER THE MIDDLE PIECE OF METAL IS CONNECTED TO THE LIVE WIRE. AFTER THE CONNEC-
TION IS COMPLETE, THE LIGHT BULB CAN BE INSTALLED, AND IT CAN BE USED AFTER BEING POWERED ON.
NOTE ①: WHEN INSTALLING THE LAMP HOLDER, YOU MUST FIRST CONFIRM WHETHER THE LAMP HOLDER WE INSTALLED MEETS
THE VOLTAGE STANDARD, WHETHER THE MAXIMUM POWER IS NOT EXCEEDED, WHETHER THERE IS ANY DAMAGE, ETC.
NOTE ②: THE MINIMUM CROSS-SECTION OF THE WIRE OF THE LAMP HOLDER SHOULD MEET THE MINIMUM CROSS-SECTIONAL
AREA SPECIFIED BY THE COUNTRY, BECAUSE IF THE MINIMUM CROSS-SECTION OF THE WIRE OF THE LAMP HOLDER IS LOWER THAN
THE MINIMUM CROSS-SECTIONAL AREA SPECIFIED BY THE COUNTRY, IT IS EASY TO CAUSE THE WIRE TO BURN OUT AND BURN THE
LAMP HOLDER AND EVEN A FIRE ACCIDENT. THEREFORE, WHEN WE WIRE THE LAMP HOLDER, WE MUST CHOOSE A WIRE LARGER
THAN THE MINIMUM CROSS-SECTION OF THE NATIONAL STANDARD TO ENSURE THE NORMAL OPERATION OF THE LAMP HOLDER IN
THE FUTURE.
In case of any query�issue with the product please reach out to us at support@vtacexports.com
V-TAC EUROPE LTD, Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
55
CROATIAN
Publicidad
