Hansgrohe Rainmaker Select 460 1jet 2401240 Serie Modo De Empleo/Instrucciones De Montaje página 4

Safety Notes
Gloves should be worn during installation to prevent
!
crushing and cutting injuries.
The product may only be used for bathing, hygienic
!
and body cleaning purposes.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• The product is not designed to be used with steam
baths!
Fault
Head shower extremely leaky
4
English
Cause
- Head shower soiled / scaled
Assembly (see page 42)
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 44)
Flow diagram (see page 38)
Spare parts (see page 33)
i Installation example (see page 38)
Cleaning (see page 45)
Remedy
- Clean / descale head shower (see
page 47)
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 60°C
70°C / 4 min