Publicidad
Idiomas disponibles
Idiomas disponibles
Warning:
1. Never use leaked batteries;
2. Chemicals in batteries could result in such health
hazards as burns. If liquid in batteries splashes to
skin or clothes, please wash with clean water in time.
If batteries are swallowed, please rinse mouth
immediately with clean water and then go to the
doctor.
HOW TO OPERATE
Cooling Mode
Under cooling mode, cooling indicator will light on.
Temperature Setting is from 60°F to 86°F.
Press Fan Speed Button to choose from low/high
fan speed.
Fan Mode
Under Fan mode, indicator will be on.
Press Fan Speed Button to choose from low/high fan speed.
Temperature cannot be set under this mode.
Dry Mode
Dry indicator will be on under this mode.
Remove water plug (see right), insert one end of pipe to drainage hose, the
other end would be in water tank or water channel.
If ambient Temp. ≥17°C or 62°F compressor starts and follow below sequence:
if ambient Temp. ≤15°C or 59°F compressor stops; when it reaches ≥17°C,
compressor starts again. (There would be a 3-min delay for compressor protection)
Fan runs with a fixed low speed.
Temp. is fixed.
Notes: Under dry mode, please dismantle air exhaust duct, or performance will be
affected and water full alarm "FL" will buzz.)
Heating Mode (not available for cooling only model).
Under this mode, heating indicator will light up.
Press UP/DOWN button to select Temp. between 16°C to 30°C (60°F to 86°F)
Press Fan Speed button to set low/high speed.
9
10
www.SereneLifeHome.com
15
Publicidad
