Publicidad
Idiomas disponibles
Idiomas disponibles
Once the pump has finished priming, the inverter will automatically switch the
pump to the pre-set speed,
showing current rpm and power consumption.
5 . 3 Timer setting
To run the pump at different times or speeds to take advantage of
lower electricity tariffs during the night, you can set up to 4 timers.
Step1：Press
to enter timer setting.
Step2：Use
or
to move cursor to the next setting. Press
a speed range for timer 1, use
specific speed if required. Press
Step3：Repeat the above steps to set the other 3 timers.
Step4：Hold
for 3 seconds or wait 10 seconds to save settings automatically.
A flashing
Step5：Press
setting.
to set current time. Press
or
or
to check all 4 timers to ensure there are no invalid
indicates the pump is running and
to choose
to decide on a
to move cursor to previous setting.
indicates the device is waiting for start time.
11
Publicidad
