AQUA SPHERE 75947 Manual De Instrucciones página 7

3. BEFORE INSTALLATION
Upon receipt of this device, check for damage to the packaging or product.
DO NOT PROCEED with installation if any damage is found; contact your
supplier.
Do not use extension leads with the device. This can pose a danger
particularly in the vicinity of a swimming pool.
Make sure the place you choose for installation meets the following conditions:
- Ambient temperature from -10~40℃
- 45 to 90 percent relative humidity,
non-condensing
- Less than 1000m above sea level
- Keep out of direct sunlight
- Good ventilation
For efficient cooling, please make sure it is
installed with a minimum clearance surrounding
it (Fig.2)
Blocked ventilation or an enclosed space with
limited air flow may cause overheating or potential
operational failure of the inverter.
5
min. 40cm
min. 25cm
Fig.2