Transport Section - Pioneer DJM-T1 Manual De Instrucciones

Transport section

DECK A
1 2 1
CUE
PUSH
BROWSE VIEW
4 4
REL. ABS. TREE FLD OPEN
FX ASSIGN
3
FX1 FX2 SYNC SYNC
BEND MASTER MASTER
Internal Playback mode
(SHIFT)+
4 1 2 4
1 f (REL.) button
! Press:
Use this to play/pause tracks.
! [SHIFT] + press:
The TRAKTOR playback tracking mode switches to the Relative mode.
The Relative mode is a mode that ignores the playback position of the
CONTROL CD/CONTROL VINYL.
2 CUE (ABS.) button
While pausing
! Press:
A cue point is set at the paused position.
— When the [SNAP] function of TRAKTOR is off:
The cue point is set to the currently paused position, regardless of the
[Beat Grid].
— When the [SNAP] function of TRAKTOR is on:
The cue point is set to the same position as the nearest [Beat Grid].
During playback
! Press:
Playback returns to the set cue point and cues, and playback pauses (back
cue).
If the [CUE (ABS.)] button is pressed and held in after returning to the cue
point, playback continues as long as the button is held.
! [SHIFT] + press:
The TRAKTOR playback tracking mode switches to the Absolute mode.
The Absolute mode is a mode that reflects the playback position of the
CONTROL CD/CONTROL VINYL on the playback position of the track.
3 FX ASSIGN (s BEND t) button
! Press the [FX 1] button:
TRAKTOR effect unit [FX 1] is assigned to the deck whose button is pressed.
! Press the [FX 2] button:
TRAKTOR effect unit [FX 2] is assigned to the deck whose button is pressed.
* When using TRAKTOR SCRATCH DUO 2, the assignment is fixed: [FX 1]
to deck [A], [FX 2] to deck [B].
If you upgrade to TRAKTOR SCRATCH PRO 2, [FX 1] and [FX 2] can be
assigned freely to the desired deck.
! Press the [SHIFT] + [FX 1] buttons:
The track's playing speed temporarily slows down.
! Press the [SHIFT] + [FX 2] buttons:
The track's playing speed temporarily speeds up.
4 SYNC (MASTER) button
! Press:
The [BPM] and [Beat Grid] of the track for the deck whose button was
pressed are synchronized to the master for synchronization.
! [SHIFT] + press:
The deck whose button was pressed is set as the master for synchronization.
DECK B
2
CUE
REL. ABS.
FX ASSIGN
3
FX1 FX2
BEND
(SHIFT)+
3
Scratch Control mode
(SHIFT)+ (SHIFT)+
3 1
Playback
Press the [f (REL.)] button.
 Pausing
During playback, press the [f (REL.)] button.
Set the cue
1 During playback, press the [f (REL.)] button.
Playback is paused.
2 Press the [CUE (ABS.)] button.
Cue point [a] is set at the position at which playback was paused.
No sound is output at this time.
! When a new Cue Point is set, the previously set Cue Point is deleted.
 Returning to Cue Point (Back Cue)
During playback, press the [CUE (ABS.)] button.
The set immediately returns to the currently set cue point and pauses.
! When the [f (REL.)] button is pressed, playback starts from the cue point.
 Checking Cue Point (Cue Point Sampler)
Press and hold the [CUE (ABS.)] button after returning to the
cue point.
Playback starts from the set cue point.
Playback continues while the [CUE (ABS.)] button is pressed.
Bending the pitch
Press the [FX 1] or [FX 2] button while pressing the [SHIFT]
button.
— Press the [SHIFT] + [FX 1] buttons:
The track's playing speed temporarily slows down.
— Press the [SHIFT] + [FX 2] buttons:
The track's playing speed temporarily speeds up.
2
15
En