Publicidad
OPERATION
Closing the Monitor Display
Press and release the CLOSE button on the
90-degree position to close the Display.
104-degree position and you want the
Display to automatically position at the
previous position when it is opened again
later, press and hold the CLOSE button until
you hear 3 quick beeps.
Notes:
¢ The CLOSE function is operable even
when the vehicle's ignition key is turned
off.
¢ If there is an obstacle during the closing
process, the Monitor stops closing and
produces a beep sound for 1.5 seconds. In
this case, press the OPEN button to open
the Monitor and remove the obstacle. Then
press the CLOSE button.
Adjusting the Brightness/
Colour/Tint (NTSC only)
¢ Rotate the BRIGHT control to adjust the
luminance (brightness) level to your
desired level.
¢ Rotate the COLOR control to make the
picture more coloured or less coloured.
¢ Rotate the TINT control to adjust the colour
batance of the picture. (Operative only on
the NTSC standard system.)
Publicidad
