ENGLISH
Automatic shut-off function
If no work is detected for more than 10 hours, the appliance will automatically shut off.
Power icon
-
When the air cooler is connected to the mains, it will beep and go into standby mode. The
indicator light of this mode will be lit.
-
Pressing this icon once will switch on the air cooler. By default, it will operate at speed 3 in
Normal mode. This number will appear on the display.
-
If you press this icon again, the air cooler will stop and return to standby mode. The air
cooler will remember the selected functions when in standby mode.
Speed icon
To adjust the speed of the cooler, press this icon. This cooler has 12 speeds.
Cool function icon
-
Press this icon to activate or deactivate the cool function.
-
Check that the water tank is properly filled. Also, for additional cooling, place the pre-frozen
cooler in the water tank.
Mode icon
-
Use this icon to change the mode. By default, the air cooler operates in Normal mode. If
you press the icon once, it will operate in Natural mode; if you press it again, it will operate
in Sleep mode.
-
The Natural mode and Sleep mode vary the speed to adapt the air flow and intensity to the
needs of the moment.
Oscillation icon
-
Press this icon once to activate the clockwise oscillation function. The corresponding
indicator light will light up.
-
If you press it again, the oscillation will change to counterclockwise.
-
Pressing it a third time deactivates the function.
Timer icon
The timer is not activated by default. To activate it, press this icon. Each time the icon is pressed,
an operating hour is added (minimum time is 1 hour and maximum time is 9 hours).
Remote control
-
The functions of the remote control are the same as those of the control panel.
-
The maximum reception distance of the remote control is 5 metres.
-
If you notice that the remote control is not working properly, replace the batteries:
1. Locate the battery-compartment cover on the back of the remote control.
42
ENERGYSILENCE 5000 COOL WAVE