cecotec ENERGYSILENCE 5000 COOL WAVE Manual De Instrucciones página 43

ENGLISH
2. Open the cover.
3. Remove the used battery carefully, paying attention to its orientation and polarity.
4. Insert the new CR2025 battery, making sure to insert it in the correct direction.
5. Close the battery-compartment cover.
- Do not allow children to play with the remote control.
4. CLEANING AND MAINTENANCE
Before cleaning the air cooler, disconnect it from the electrical outlet. To clean the air cooler
properly, follow this order:
1. Clean the water tank.
The body of the air cooler can be cleaned with a soft cloth and neutral soap. Do not use
corrosive products, petrol, or alcohol to clean the plastic parts of the air cooler.
Remove the water tank and clean it with a brush. Rinse it well, dry it and put it back in place.
2. Clean the rear grille.
Remove the filter from the rear grille and clean it with a brush.
3. Collect the power cable.
After cleaning the cooler, if you are not going to use it for a long time, wind up the power cable.
To store the air cooler:
1. Make sure the water tank is empty and completely dry.
2. Put the air cooler in its box and cover it with a protective cover.
3. Store it in a cool and dry place.
5. TECHNICAL SPECIFICATIONS
Product reference: 08199
Product: EnergySilence 5000 Cool Wave
Voltage: 220 - 240 V
Frequency: 50 / 60 Hz
Power: 28 W
43
ENERGYSILENCE 5000 COOL WAVE