Garant 434336 Manual De Instrucciones página 20

GARANT Digital dial indicator HCT
de
2
en
1
bg
DATA DATA
0 0 0
da
DATA
1. Press
fi
SET
2. Press
7.2.3. MODE (measuring the minimum, maximum, delta)
fr
NodE
Switches the number display mode between normal (current measurement value), MIN, MAX and DELTA.
it
- Briefly pressing
- Pressing and holding
hr
7.2.4. TOL (tolerances)
toL
lt
 To define tolerance limits, enter the upper and lower deviations relative to the nominal value.
nl
 Tolerance values can be displayed in the MIN, MAX or DELTA modes.
 To measure internal dimensions, the display colours of the tolerance indicator (red and yellow) can be swapped by as-
signing the input sequence for the tolerance deviations the other way round (upper deviation < lower deviation).
no
 If no tolerance limits have been defined, the display colours of the tolerance indicator will be deactivated.
 Different tolerance values can be entered for the two references REF1 and REF2.
pl
Entering tolerances
To input values directly, see PRE (input of preset values). [} Page 19]
pt
SET
Press to apply changes and return to the main display.
ro
DATA
toL
ru
sv
sk
sl
es
cs 1 Enter the lower tolerance limit
DATA
1. Press
SET
hu
2. Press
20
to select the next digit.
to select the next numerical value.
SET
resets the saved MIN/MAX value [CLEAR].
SET
(>2s) records the current measurement value as the preset value.
DATA
OFF
TOL
000, 0 20
-
1
000, 0 50
+
2
to select the next digit.
to select the next numerical value.
On
TOL
TOL
2 Enter the upper tolerance limit