Publicidad
Idiomas disponibles
Idiomas disponibles
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
Finish cooking
1. Touching the heating zone selection control
that you wish to switch off.
3. Turn the whole cooktop off by touching the
ON/OFF control.
Using the Boost function
Activate the boost function
1. Touching the heating zone selection control,
then touching "+". Make sure the display
shows "9".
Cancel the Boost function
1. Touching the "-" button to cancel the Boost
function, then the cooking zone will revert
to its original setting.
• The cooking zone returns to its original setting after 5 minutes.
alternately with the heat setting
18
2. Turn the cooking zone off by scrolling down to
"0" or touching "-" and "+" control together.
Make sure the display shows "0".
OR
4. Beware of hot surfaces
H will show which cooking zone is hot to touch.
It will disappear when the surface has cooled
down to a safe temperature. It can also be used
as an energy saving function if you want to
heat further pans, use the hotplate that is still
hot.
2. Touching the "+" button again ,the zone
indicator show "b" and the power reach Max.
2. Touching "-" and "+" control together. the
cooking zone switch off and the boost function
cancel automatically.
Publicidad
