Publicidad
Idiomas disponibles
Idiomas disponibles
GETTING STARTED
1
Cancel the demonstration
1
Press and hold
2
Turn the volume knob to select [DEMO], then press the knob.
3
Turn the volume knob to select [DEMO OFF], then press the knob.
4
Press
to exit.
2
Set the clock
1
Press and hold
2
Turn the volume knob to select [CLOCK], then press the knob.
3
Turn the volume knob to select [CLOCK SET], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5
Turn the volume knob to select [24H/ 12H], then press the knob.
6
Turn the volume knob to select [12 HOUR] or [24 HOUR], then press the
knob.
7
Press
to exit.
To return to the previous setting item, press
3
Set the basic settings
1
Press and hold
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
4
.
.
.
.
.
SETTINGS
BEEP
ON: Activates the keypress tone. ; OFF: Deactivates.
SRC SELECT
AM *
ON: Enables AM in source selection. ; OFF: Disables.
PANDORA *
(For KD-SR61)
ON: Enables PANDORA in source selection. ; OFF: Disables.
IHEART *
(For KD-SR61)
ON: Enables IHEARTRADIO in source selection. ; OFF: Disables.
AUX *
BT ADAPTER: Selects when the KS-BTA100 Bluetooth adapter is
connected to the AUX jack. ( 8) ; ON: Enables AUX in source selection. ;
OFF: Disables.
F/W UPDATE
SYSTEM
F/W xxxx
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
CLOCK
CLOCK SYNC
AUTO: The clock time is automatically set using the Clock Time (CT) data
in FM Radio Broadcast Data System signal. ; OFF: Cancels.
CLOCK DISP
ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
* Not displayed when the corresponding source is selected.
Default: XX
Publicidad
