GE CHP9536 Manual Del Propietário página 10

C)
>
0
E
(D
Ct2
O
Q)
(1)
K3
n
O
C)
O
T
U)
(l)
E
(1)
fi2
O
O
O
U
W
I
k-
Z
R
10
Multiple Timers
Timer Mode
For more information see Custom Settings, Timer Mode
section for Multi-Timer feature. Each burner can be
linked to a timer. Burner must be on to set the timer.
When more than one burner is on, the order of the timer
is from left to right.
Burner Power Level
To Turn ON Multiple Timers
1. Touch the Timer Select pad. The corresponding
burner power level and the display will blink. Touch
the A or V arrows to adjust time. Timer automatically
starts after 3 seconds if there is no further action. The
"ON" LED will light when timer is on.
2. To set timer for the next burner, touch the Timer
Select pad. The corresponding burner power level and
the display will blink. Touch the A or V arrows to adjust
time. Timer automatically starts after 3 seconds if
there is no further action. The "ON" LED will light when
timer is on. Repeat the steps for the remaining timers.
To Turn OFF Multiple Timers
Hold Timer Select pad for 3 seconds to cancel timer.
The corresponding burner power level and display will
blink. When the burner times out, the corresponding
timer also times out.
v i3_L, _ A
X
: z
Display
_V _ '_j_
! O) I
Hot Light Indicator
A hot surface indicator light (one for each cooking
element) will glow when the glass surface is hot and will
remain on until the surface has cooled to a temperature
that is safe to touch.
Detection Removal
Ovi
When a pan is removed from the cooktop surface,
Burner level turns off; Power arc starts to blink. If a pan
is not detected for 25 seconds, the control turns off
automatically, lights turn off.
:t
w
\
Hot Surface Indicator Light
Power Arc
ot*_ {or
H