Panasonic PanaFlat LC50P Manual De Instrucciones página 12

Menu Screen The menu screen changes to two different screens according to the screen resolution.
The menu screen is displayed by the MENU key.
The adjustment items of this unit are displayed as icons.
Each icon indicates an adjustment item shown in the figure.
When the resolution is 640 x 400 to 832 x 624
CONTRAST BACKLIGHT H. POSITION H. SIZE V. POSITION
V. SIZE COLOR TEMP VIDEOLEVELADJ OISP.FREQ LANGUAGE
AUTO SIZE RECALL OSD POSITION PICTURE
CONTRAST BACKLIGHT H.POSITION Y FINETUNE_ Y. POSITION
H.FINETUNE COLOR TEMP VIDEO LEVEL ADJ DISP. FREQ LANGUAGE
AUTO SIZE RECALL OSD POSITION PICTURE
100 DRE
MENU — CONTRAST
Adjustment Item Screen
(9 CONTRAST (White level)
Adjust the screen contrast. (Standard level = 100)
Press the MENU key to register the setting value.
Direct operation: Even if the menu screen does not appear, the contrast can be adjusted by
«4,» au y
pressing the "+" or "—" key.
-O:, BRIGHTNESS (Black level)
Adjust the brightness (low gradation part: black level). (Standard level = 50)
Direct operation: Even if the menu screen does not appear, the contrast can be adjusted by
pressing the "q" or "D>" key. Press the MENU key to register the setting value.
XQ. BACKLIGHT
Adjust the brightness of the backlight (Standard value = 100) by pressing the "+" or "—" key.
LE H. POSITION
The horizontal position of the image can be adjusted by pressing the "+" or "—" key.
H. SIZE 'Adjustment when the resolution is set from 640 x 400 to 832 x 624.
The horizontal amplitude of the image can be adjusted.
After aligning the left edge of the image by the horizontal position adjustment, change to the
horizontal size adjustment and perform the adjustment by the "+" or "-" key.
TUA V. FINETUNE *Adjustment when the resolution is 1,024 x 768.
When the 1,024 x 768 screen resolution is used, vertical stripes may be observed depending
on the desktop patterns or applications. If this occurs, perform the following adjustments.
Display a screen which has vertical stripes and align the right side of the screen by the
horizontal position adjustment, then change to the vertical stripe adjustment (V. FINETUNE)
and perform the adjustment using the "+" or '—" key.
11