36 OPERATION
Loading 10 Place Settings
CAUTION
• Do not place bowls in the center of the cutlery
rack. The door may not close properly, resulting
in leakage.
Height Adjustable Tray
This feature is only available on some models.
The tray on the left side can be adjusted to a high
or low position to accommodate utensils or cutlery
of different sizes. Remove dishes before adjusting
the tray. Adjust the tray by sliding the lever.
Removing the Cutlery Rack
The entire cutlery rack can be removed if more
space is needed on the upper rack for larger items.
Always remove the cutlery from the rack before
removing the rack.
Pull the rack out to the end of the rails. Then, lift
the front of the rack so that the rollers clear the
stop on the end of the rail. The rack can now be
slid forward and removed from the rails.
WARNING
• Be careful when loading and unloading items
with sharp edges. Load sharp knives with the
blade down to reduce the risk of injury.
Folding Down the Cutlery Tines
Fold tines to fit flatware.
Pull tines back up to fit smaller dishes.
Adding Cleaning Products
Adding Detergent to the Dispenser
• Remove the label on the dispenser prior to
running the dishwasher for the first time.
• The amount of detergent needed depends on
the cycle, load size, and soil level of dishes.