Jackery Explorer 1000 Manual Del Usuario página 7

LED Light
The LED light has three modes: Low Light mode, High Light mode, and SOS mode.
Press the LED light button and the LED light will turn on. The default mode is Low Light mode. Press the
LED button again to switch it to high light mode, SOS mode, or turn o the LED light in sequence. In any
of such modes, you can press and hold the LED button to turn o the LED light.
1.
Low Light mode
APP CONNECTION
This product supports the connection of Jackery App for intelligent control and operation. Users can
download the Jackery App through App Store or Google Play. For more information, please refer to
Jackery App User Manual.
CHARGING YOUR JACKERY EXPLORER 1000
Fully charge the device before its first use.
Note: 1. The recommended charging temperature for the product is between 0°C to 45°C (32°F to 113°F),
and the discharging temperature is between -10°C to 45°C (14°F to 113°F). Operating the product
outside this temperature range may restrict its charging and discharging capabilities, or even render it
unable to charge or discharge.
2. The charging power and battery capacity of the product may vary due to temperature fluctuations.
Charging via AC Wall Outlet
Connect the AC charging cable to the input port of the power station and plug it into the
wall outlet.
Emergency Charging Mode
Under this mode, you can rapidly power up the portable power station using the AC charging
method. This emergency charge function can be activated or deactivated through the Jackery
app. When in emergency charging mode, the circular light indicating the state of charge (SOC)
will blink at an increased pace.
* To maximize battery life, it is best to
charge at normal speed. We recommend
using emergency charging mode only
when necessary. It's not recommended
for regular, long-term use.
2.
High Light mode
Explorer 1000
US
SOS
3.
SOS mode
AC Charger
05