Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Hold the tab on the seal to pull it off the tank cover. Wash the tank, its cover and seal in
EN
warm soapy water. Dry all parts thoroughly (see Fig. 16).
4.
Reassemble the dirty water tank. Reinstall the seal onto the tank cover. Attach the tank
cover back onto the dirty water tank by placing the back edge of the tank cover onto the
back of the dirty water tank and then lowering the front edge of the tank cover. Clip the latch
back into place (see Fig. 17).
Slot the dirty water tank back onto the main body (see Fig. 18).
5.
6.3. CLEANING THE WASH TOOLS AND HOSE
1.
To clean the hose, press the on/off button to turn the fabric cleaner on and suck up clean
water from a bowl (see Fig. 19).
2.
Press the wash tool release button and pull the wash tool from the hose handle
(see Fig. 20).
3.
Prise open and remove the transparent cover from the large wash tool. Clean the wash tools
in water or warm soapy water, if required. Make sure to remove any dirt or debris from inside
the wash tool's tube. Allow to dry thoroughly (see Fig. 21).
4.
Reattach the transparent cover to the wash tool, making sure it clicks firmly back into place
(see Fig. 22).
6.4. CLEANING THE FILTERS
■
Remove the water tank(s).
■
Take the air inlet filter out of the dirty water tank and take the foam filter out of the clean
water tank. Use tweezers, if necessary. Rinse the filters under running water. Allow to dry
thoroughly.
■
Reinsert the filters and the water tanks (see Fig. 23).
6.5. STORAGE
■
Always unplug and clean the appliance before storing it.
■
Stow the power cord on the power cord storage hook.
■
Wind the hose around the appliance and clip it into the hose hook.
■
Store the appliance in a dry, dust-free place away from direct sunlight.
12
Publicidad
