Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning and maintenance
WARNING!
• To prevent the risk of electrocution, always turn off and
unplug the unit from the mains supply before cleaning.
• Never immerse the main unit, motorised brush, AC
adapter or cable in water or any other liquid. Never
rinse them under the tap.
NOTE: Never use solvents, chemical or abrasive cleaning
products, wire brushes, sharp objects or scouring pads
to clean the unit.
• Detach all the tools from the main unit before cleaning.
• Empty the dust cup after each use.
• Clean the dust cup and filters at least once a month or more
often if required.
Main unit
Motorised brush
Extension tube
Dust cup
HEPA/Foam filter
Filter assembly
Crevice tool
Mini brush tool
• Once dried, re-assemble all parts.
Emptying the dust cup
• To empty the dust cup, turn off the vacuum cleaner.
• Detach the extension tube and/or vacuum tool from the main
unit's air inlet.
1.
Hold the main unit vertically over a bin. Press down on the dust cup lid release button.
2.
The lid on the bottom of the dust cup will flip open. Close the lid after emptying the
contents.
Wipe with a slightly damp, soft cloth. Dry well.
Rinse under a tap or wash in soapy water with a soft
sponge. Shake off any excess water and allow to
completely air dry.
12
EN
Publicidad
