Descargar Imprimir esta página

LD Systems IMA 120 Manual De Instrucciones página 4

Ocultar thumbs Ver también para IMA 120:

Publicidad

This symbol identifies hazards that can cause electric shock.
This symbol identifies hazardous areas or hazardous situations.
This symbol indicates hazards caused by hot surfaces.
This symbol indicates dangers due to high volume levels.
This symbol denotes a device that does not contain
any user-serviceable parts.
This symbol indicates additional information on the operation of the product.
SAFETY INSTRUCTIONS
DANGER:
1. Do not open the device and do not perform any modifications.
2. If your device no longer functions properly, if liquids or objects get inside it or if it has
been damaged in any other way, switch it off immediately and disconnect it from the
mains. The device may be repaired only by authorised repair technicians.
3. For devices of protection class 1, the protective conductor must be connected correctly.
Never disconnect the protective conductor. Devices of protection class 2 do not have a
protective conductor.
4. Ensure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the device fuse.
WARNING:
1. The device may not be operated if it shows obvious signs of damage.
2. The device may only be installed in a voltage-free state.
3. If the mains cable of the appliance is damaged, do not operate the appliance.
4. Permanently connected power cables may only be replaced by a qualified person.
4

Publicidad

loading

Este manual también es adecuado para:

Ima 240