Publicidad
Technical Data
Code
Description
Voltage
Frequency
Power
WARNING
Avoid the risk of electric shock or severe injury. When the power cable gets damaged
it should only be replaced by the manufacturer or at a
The build quality of the electric insulation is altered if spills or liquid gets into the tool while in use.
Do not expose to rain, liquids and/or dampness.
Before gaining access to the terminals all power sources should be disconnected.
WARNING
Power Requirements
WARNING
The equipment shall be grounded while in use to prevent an electric shock.
• Connect plug into a properly grounded contact or outlet as shown in
example A. Not all contacts or outlets are properly grounded. If not sure,
contact with a certified electrician.
• If the outlet you want to use with the equipment has two poles (2 orifices),
FOR ANY REASON AT ALL DO NOT REMOVE OR ALTER THE PLUG'S EARTH
TERMINAL. Use a temporary adapter as shown in example B and always
connect the earth conductor's lug as indicated.
CAUTION
When using an extension cord, verify the gauge is enough
for the power that your product needs. A lower gauge cable will cause voltage
drop in the line, resulting in power loss and overheating. The following table
shows the right size to use depending on cord´s length and the ampere
capability shown in the tool's nameplate. When in doubt use the next higher
gauge.
Ampere
Capacity
From 0 and up to 10 A
From 10 and up to 13 A
From 13 and up to 15 A
From 15 and up to 20 A
WARNING
When operating power tools outdoors, use a
extension cable labeled "For Outdoors Use". These extensions are specially designed for
operating outdoors and reduce the risk of electric shock.
Power Cord Grips used in this product: Type "Y"
Tool Build Quality: Basic Insulation
Thermal insulation on motor winding: Class B
Number of
Conductors
From 6 ft to 49 ft
3 (one grounded)
CV-TER06
48005
PPR Welding machine
120 V
60 Hz
800 W
Authorized Service Center.
CAUTION
Extension Gauge
|
Higher than 49 ft
18 AWG
16 AWG
14 AWG
8 AWG
grounded
A
B
16 AWG
14 AWG
12 AWG
6 AWG
3
ENGLISH
Publicidad
