HyperMotion CLIMBER-6FT Manual Del Usuario página 21

5. INSTALLATION
Step 1
Make an octagon with 4 short blue bars (A) and 4 long
blue bars (M) as follows.
Step 2
Connect 1 yellow bar (B) and 1 blue bar (A) using a short bolt (F), a nut (G), and 2 washers (H),
using an Allen wrench (I) and a flat wrench (J). Make sure that a long bar (M) and two short bars
(A) form a triangle, or a short bar (and) two medium bars (B) form a triangle.
M
M
M
B
A
M
M
20
EN