Abus BRIDGE One Instrucciones De Funcionamiento página 12

3.3
3.4
22
The LED of the Wi-Fi bridge signals the following:
LED LED status Description
colour
shining normal operating status
flashing installation process /
boot process
3x flashing No Wi-Fi connection possible
every 60 // cMAP Cloudserver cannot be
sec. reached
5x flashing Connected ABUS One device
every 60 cannot be reached via Blue-
sec. tooth
white, blue Firmware update is being
flashing performed
flashing ABUS One device is being
connected via Bluetooth
Cleaning and care
Clean BRIDGE One only with a damp cloth,
do not use aggressive cleaning agents.
Perform a factory reset:
To reset the Wi-Fi bridge to the factory settings, you
must remove it from the socket and then plug it back
in again. Please repeat this twice more. The Wi-Fi
bridge must be plugged into the socket and unplug-
ged during the boot process (this can be recognised
by the flashing white LED on the Wi-Fi bridge).
23