Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Double Insulation
Double insulation is a concept in safety in electric power tools, which eliminates the need for
the usual three-wire grounded power cord. All exposed metal parts are isolated from the
internal metal motor components with protecting insulation. Double insulated tools do not need
to be grounded.
WARNING
The double insulated system is intended to protect the user from shock resulting
from a break in the tool's internal wiring. Observe all normal safety precautions
to avoid electrical shock.
IMPORTANT
Servicing of a tool with double insulation requires extreme care and knowledge of the system
and should be performed only by a qualified service technician. For service, we suggest you
return the product to your nearest authorized service for repair. Always use original factory
replacement parts when servicing.
Electrical Connection
The product has a precision-built electric motor. It should be connected to a power supply
that is 120 volts, 60 Hz, AC only (normal household current), 60 Hz. Do not operate this
tool on direct current (DC). A substantial voltage drop will cause a loss of power and motor will
overheat. If the product does not operate when plugged into an outlet, double-check the power
supply.
Extension Cords
When using a power tool at a considerable distance from a power source, be sure to use an
extension cord that has the capacity to handle the current the tool will draw. An undersized
cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart
to determine the minimum wire size required in an extension cord. Only round jacketed cords
listed by Underwriter's Laboratories (UL) should be used.
When working outdoors with a product, use an extension cord that is designated for outside
use. This type of cord is designated with "W-A" or "W" on the cord's jacket.
Before using any extension cord, inspect it for loose or exposed wires and cut or worn
insulation.
12
Publicidad
