Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning And Maintenance Of The Oven's Front Door Glass
Remove the profile by pressing the plastic latches on both left and right
sides as shown in figure 22 and pulling the profile towards yourself as
shown in figure 23. Then remove the inner-glass as shown in figure 24. If
required, middle glass can be removed in the same way. After cleaning and
maintenance are done, remount the glasses and the profile in reverse order.
Make sure the profile is properly seated in its place.
Figure 22
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure,
first remove the lower, and than the upper side from installation location. To
install wire racks; reverse the procedure for removing wire rack.
Changing The Oven Lamp
WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the figure. If you
have difficulty in turning, then using plastic gloves will help you in turning.
Then remove the lamp by turning, install the new lamp with same
specifications
Reinstall glass protection, plug the power cable of appliance into electrical socket
and complete replacement. Now you can use your oven.
Type G9 Lamp
Figure 23
220-240 V, AC
15-25 W
Figure 25
Type E14 Lamp
34
2
1
Figure 24
220-240 V, AC
15 W
Figure 26
V.1
Publicidad
