Cleaning And Maintenance - Easy Home DEU004 Manual Del Usuario

Cleaning and maintenance

CAUTION:
Always be sure that the vacuum is turned OFF and UNPLUGGED before cleaning or
attempting to store the item. NEVER IMMERSE THE MOTOR in water or any other
liquid. NEVER operate the vacuum without the dust container and filter in place.
How to clean the filters
1. Turn the dust container lid to open by lining up the arrow with "filter access".
Remove the HEPA filter assembly from the dust container lid by rotating the
filter. It is recommended that the filters are washed after every 5 dust
container empties. Remove the mesh frame from around the mesh filter, then
gently tap both filters to release any excess dust.
2. Wash both the HEPA filter and mesh frame under warm water until the water
runs clean and clear. Remove excess water by shaking both filters. Leave to dry
for 24 hours. Reassemble filter and refit back into dust container lid, only when
completely dry.
3. Exhaust Filter – The exhaust filter is located at the bottom of the vacuum. Press
the latch and pull the exhaust filter grill away from the vacuum.
4. Pull the bottom of the filter outward so the top of the filter unhooks from the
filter recess. The exhaust filter can be lightly rinsed with warm tap water.
Please make sure that the exhaust filter is completely dry before the next use.
How to clean the dust container
1. Remove the dust container lid and HEPA filter from the dust container.
2. The dust container can be rinsed with warm soapy water and dried with a soft
cloth. Please make sure that the dust container is completely dry before next use.
12
Cleaning and maintenance