User Instructions; Important - Easy Home DEU004 Manual Del Usuario

User instructions

How to turn ON/OFF the upright vacuum
1. Before using the vacuum, plug into a power outlet.
2. The removable hose MUST be placed securely in the hose receptacle.
3. Press the ON/OFF pedal on the right near the base connected to the vacuum
head to turn the vacuum ON.
4. Press the ON/OFF pedal again to turn the vacuum OFF.
5. Unplug the vacuum after each use.
How to use the floor care control selector
1. The control selector raises and lowers the height of the nozzle.
2. Make sure the vacuum is in the upright (parked) position and move the
selector to the required setting for the type of floor covering.
Settings:
#1 Hard floors - Best performance and energy efficiency, short to medium pile
carpets, hard wooden floors, wooden floor boards with crevices, ceramic tiles
#2 Low pile – Low pile carpets, delicate floor coverings such as vinyl or linoleum,
parquet flooring
#3 and #4 Medium/High pile – For longer pile carpets, the motion resistance
may increase Use these intermediate settings to reduce the force required to
push the vacuum
#5 Tool mode – Luxury carpet and tool mode
IMPORTANT: Using this vacuum for loop pile carpets with pile greater than 1 inch
(30 mm) is not recommended. Consult the carpet manufacturer's recommended
cleaning instructions before vacuuming.
NOTE: When cleaning delicate hard floors such as vinyl or linoleum, the control
switch must be moved to position 2. Failure to do so may cause damage to the
floor.
8
User instructions