Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
If exposed to cold temperatures, allow contents to come to room
temperature before completing assembly. Remove contents from
box, ensuring all parts listed are included:
• Backrest (1 pc)
• Backrest support tubes (2 pcs)
• Backrest connecting tubes (2 pcs)
• Seat (1 pc)
• Seat support tubes (2 pcs)
• Leg tubes (4 pcs)
• Tips (4 pcs)
Use
1. Place seat upside down on a flat
surface so the four leg receptacles
are facing upward.
2. Insert first leg into the leg
receptacle by depressing
pushbutton. When the leg is
in place, the pushbutton will
extend out and lock the leg in
place. (Figure 1)
3. Repeat Step 2 for the remaining
three legs.
4. Attach backrest to seat by
inserting both back support tubes
into the back support receptacle
on the seat. The pushbuttons
will snap out and lock the back
support in place. (Figure 2)
Leg Height Adjustment
1. Before use, adjust the height of
each leg to your specific needs,
making sure all legs are at the
same height. When desired height
is reached, lock legs into place by
aligning buttons into proper holes
(Figure 3).
2. Ensure that the legs are locked
into place by pushing down and
pulling up on each leg.
G2-102KX1, G2-102KX4 (PIC-00303 | V2 022724)
Figure 1
Figure 2
Figure 3
1
2
3
3
Publicidad
