Descargar Imprimir esta página

Princess 01.358450.01.001 Manual De Usuario página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
Instruction manual
BEFORE THE FIRST USE
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
Before using your appliance for the first time, wipe off all
removable parts with a damp cloth. Never use abrasive products.
Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
Put the power cable into the socket. (Note: Make sure the voltage
which is indicated on the device matches the local voltage before
connecting the device. Voltage 220V-240V 50Hz).
How to assemble
Installing the base
1. Remove the nut from the stand, and insert the stand into the base.
2. Tighten the nut from the bottom of base to secure the stand to the
base.
3. Tighten the nut securely, not to be loosened.
Installing the rear guard
4. Remove the guard stopper nut ,cap and Blade nut. Fix the rear
guard to the motor.
5. Tighten the guard stopper nut securely.
Installing the blade
6. Insert the blade into the motor shaft closely.
7. Tighten the blade with blade nut.
Installing the front guard
8. Align the hook of front guard with the marked spot at the top of rear
guard, then insert the wire rod. Match front and rear guards, insert in
order from top to bottom (all the way around). Engage the clip to fix
the front and rear guard as shown in the figure and fix with screw.
8
How to adjust the height of slide pipe
Press the height adjustment button to release the lock and enable to
adjust the height of slide pipe.
Attention:
Make sure to fix the slide pipe before carrying.
When you have difficulty in raising up the slide pipe or pressing
the height adjustment button, once push down the pipe, then
press the button and raise the pipe.
How to adjust the vertical wind direction by hand
Adjust to the desired angle with grasping the main body, holding
the handle and oscillating up and down.
Replacing the battery of the remote control
Note: Please follow battery disposal instruction on battery packaging,
or contact your local councils for safely disposal of batteries.

Publicidad

loading

Este manual también es adecuado para:

358450