Publicidad
Idiomas disponibles
Idiomas disponibles
USE
On/off button
•
Each press of the button will switch to on or off.
•
After connect to the power supply, the fan will be in standby
mode, press the on/off button, the fan starts operation at level 3
(speed of level 3 is displayed on the LED display window).
•
Memory function:
–
When fan stops and you press the on/off button, the fan
starts operation at the previous setting of speed and swing
mode.
–
When completely unplugged, memory will be deleted.
Speed adjustment button
•
Turn the speed adjustment button to choose the desired speed
between 1 and 24.
•
Turn the adjustment in the clockwise direction could strengthen
the speed, counter clockwise of direction could moderate the
speed. The set speed will be shown on the LED display window.
Timer button
On timer setting:
•
Press the timer button to start the time setting, each push adds /
decreases 1 hour with a maximum of 24 hours. The LED display
window indicate the number of hours selected. "0H" means the
device is not in timer mode.
Off timer setting:
•
With the device on, press timer button to enter off timer mode,
press timer button again to choose the hour between 1H and
24H.
•
After 5 seconds without action, the setting is saved and current
set speed will be shown on the LED display window. Press the
timer button again, the preset hour will be display on the LED
display window.
•
When the preset hours of off timer has passed, the fan stops
operation.
•
Press on/off button to exit timer mode, the fan starts operation at
"Normal" setting.
•
Attention: The appliance cannot set on and off timer
simultaneously.
Swing (Oscillation) button
•
Press to swing horizontally, press again to stop swing.
Mode button
•
Press this button to choose between the following modes, and
the corresponding mode icon on the LED display lights up.
–
Normal mode: Working at the setting level.
–
Nature mode: The device changes the speed at intervals
depending on the selected starting speed, thereby producing
pleasant and natural air circulation.
–
Sleep mode: The night mode is like the natural mode and
starting from the selected start speed, it automatically
switches between the levels. The fan changes to the next
lower speed level every 30 minutes. Once it reaches the
lowest level, it remains in this mode until the device is turned
off by the sleep timer or manually.
Smart button
•
With this function enabled, the fan can automatically change fan
speeds if the ambient temperature is above 24°C.
Instruction manual
EN
9
Publicidad
