Caller-Id Function (Clip); New Calls; Consulting The Call List - Topcom BUTLER 920 Manual De Usuario

You can change the dial mode of the phone by accident when
pressing the flash key for 5 seconds in standby. The wrong
dialling mode will cause that the number isn't dialled correctly
or isn't dialled at all.

7 Caller-ID function (CLIP)

The Topcom Butler 920 displays the telephone numbers of incoming
calls. This function is only possible if you are subscribed to a telephone
operator that provides this service. Contact your telephone provider for
more information.

7.1 New calls

7.2 Consulting the call list

When you receive a call, the numbers are saved in a call
list. This list can hold up to 20 telephone numbers (each
of maximum 25 digits).
If the number is longer then 14 digits, you can scroll
further to the right to view the other digits.
When you have received a new unanswered call, the CLIP
symbol will blink on the display.
1
Press the call log key.
The last received call is displayed. If the list is empty,
"NO CLIP" is shown.
The following will appear on the display:
A.Progress number
B.Date (DD-MM)*
C.Time (24h format)*
Caller-ID function (CLIP)
17