Descargar Imprimir esta página

mabe RMB302PXLRS0 Instructivo página 47

Refrigerador con congelador inferior

Publicidad

Idiomas disponibles

Idiomas disponibles

care and maintenance of the appliance
WARNING: DISCONNECT THE APPLIANCE FROM
THE POWER SUPPLY BEFORE CLEANING OR
DEFROSTING THE REFRIGERATOR.
general cleaning
• Dust behind the refrigerator and on the ground should be regu-
larly cleaned to improve the cooling effect and to save energy.
• Check the door gasket regularly to make sure there are no debris.
Clean the door gasket with a soft cloth dampened with soapy wa-
ter or diluted detergent.
• The interior of the refrigerator should be cleaned regularly to
avoid odors.
• Turn off the power before cleaning the interior, remove all foods,
drinks, shelves, drawers, etc.
• Use a solution made with two tablespoons of baking soda and a
quart of warm water and a soft cloth or sponge to clean the inte-
rior of the refrigerator. Then rinse with water and wipe clean. Af-
ter cleaning, open the door and let it dry naturally before turning
on the power.
• For areas difficult to clean in the refrigerator (such as gaps or cor-
ners), it is recommended to wipe them regularly with a soft cloth
or brush, and when necessary, combine them with an auxiliary tool
(such as thin sticks) to ensure there are no contaminants or bacte-
ria accumulation in these areas.
• Do not use soap, detergent, scrub powder, spray cleaners, etc., as
these may cause odors in the interior of the refrigerator or con-
tamination of food.
• Clean the bottle frame, shelves and drawers with a soft cloth
dampened with soapy water or diluted detergent. Dry with a soft
cloth or let air dry.
• Wipe the outer surface of the refrigerator with a soft cloth damp-
ened with soapy water, detergent, etc., and then wipe dry.
• Do not use hard brushes, clean steel balls, wire
brushes, abrasives (such as toothpastes), or-
ganic solvents (such as alcohol, acetone, ba-
nana oil, etc.), boiling water, acid or alkaline
items, which may damage the refrigerator sur-
face and interior. Boiling water and organic sol-
vents such as benzene may deform or damage
plastic parts.
• Do not rinse directly with water or other liquids during cleaning to
avoid a short circuit or affect electrical insulation.
47

Publicidad

loading