Publicidad
Idiomas disponibles
Idiomas disponibles
Power
Capacity
AC Input
Input system
Nominal voltage
Frequency
Voltage range
Frequency range
Input power factor
Bypass Voltage Range
Battery Input
Nominal Voltage
Battery Capacity &
Quantity
Backup Time
Battery charger time
AC Output
Output wiring system
Inverter Mode / Output
voltage
Waveform
Harmonic Distortion
Output frequency
Overload capability
Transfer time
E ciency
Line Mode
Battery Mode
Other Information
Communications
Alarm Function
Protection Function
Noise
Mechanical
W x H x L
Kg
Ambient Temperature (-10ºC ~ 40ºC) / Environment humidity (0 ~97% no condensing)
42
SPECIFICATION
CRA 6015
CRA 6025
1500 VA
1350 W
HV: 208/220/230/240Vac / LV: 100/110/ 120/ 127 Vac
HV: 90~300VAC±5VAC / LV: 60- 145Vac±3VAC
HV: 115~285 VAC×(1±3%) / LV: 80~ 140 VAC×( 1±3%)
48 V
12V/7AH x 4pcs
12V/7AH x 6pcs
Half loaded ≥ 8minutes
Full loaded 3 minutes (standard)
Charger to 90% battery capacity in 5 hours(standard) Dependent on the capacity of
external batteries (long backup time)
HV:208/220/230/240Vac±2% / LV: 100/ 110/ 120/ 127Vac±2%
THD<2% (linear load) / THD<7% (nonlinear load)
50/60±4Hz (Sync mode) / 50/60Hz±1% (Fix Freq. mode)
105 ~ 125%≥ 60s, 126 ~ 150%≥30s The recover point is 70%
HV:88% LV:86%
HV:88% LV:86%
HV:86% LV:86%
HV:87% LV:87%
RS232 RS485(optional), Dry contact(optional), Network Card(Option)
AC/DC input under abnormal, overload condition and Inverter problems
AC input or output above or below the range of voltage, overload, over temperature and
<50dB
190×318×368
145×220×390
14.0
Storage (- 15ºC~+45ºC)
CRA 6040
2500 VA
4000 VA
2250 W
3600 W
Single phase (L/N+PE)
50/60Hz
(40~70)±0.5Hz
>0.90
72 V
192 V
12V/7AH x 12pcs
Full loaded ≥ 3minutes (standard)
Single phase (L/N+PE)
Sine Wave
Battery <-> Line Mode :0ms
HV:89% LV:87%
HV:89% LV:87%
short circuit protection
190x360x528
21.6
35.0
CRA 6060
6000 VA
5400 W
192 V
12V/7AH x 12pcs
Half loaded ≥ 6minutes
HV:92% LV:88%
HV:92% LV:88%
<55dB
190x360x528
37.0
EN
Publicidad
