Federal Signal SelecTone 314X Instrucciones De Instalación Y Mantenimiento página 6

Installation and Maintenance Instructions
• Establish a procedure to routinely check the signal system for
proper activation and operation.
• Any maintenance to the unit MUST be performed by a trained
electrician in accordance with NEC Guidelines and local codes.
• Never alter the unit in any manner.
• The nameplate should NOT be obscured, as it contains cautionary
and/or other information of importance to maintenance personnel.
• After installation and completion of initial system test, a program
for periodic testing of this device must be established. Refer to
NFPA 72G, local Fire Codes and the authority having jurisdiction
for this information.
• Provide a copy of these instructions to the Safety Engineer,
operator(s) and maintenance personnel.
• File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the device.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
An Overview of the Speakers
The Federal Signal Model 304X and 314X Explosion-Proof
Amplified Speakers are designed to produce crisp, clear tones in
supervised alarm notification systems. Both models are compatible
with fire alarm, voice evacuation, suppression supervised control
panels, and power boosters.
These amplified speakers can broadcast tones generated by a Tone
Card installed into the speaker (the plug-in 32-tone UTM) or by a
central tone source in a voice evacuation or paging system. When live
public address or voice messages are required, plug-in Federal Signal
Connector Cards (AM25CK or AM70CK) interface with the Vrms of
the EVAC panel.
Models 304X and 314X Explosion-Proof Amplified Speakers
6