iRobot J557840 Guia Del Usuario página 15

Cleaning the Sensors, Camera Window
and Charging Contacts
1
Wipe sensors, camera window, and
charging contacts with a clean, dry cloth.
RVE-Y1 models only
Important: Do not spray cleaning solution
or water onto the sensors or sensor
openings.
Cleaning the Mopping Pad
HAND WASHING
Thoroughly wash the
pad with warm water.
MACHINE WASHING
Wash using the warm
cycle, then air dry.
Do not tumble dry.
Do not wash with
delicates.
Replacing the Wick Cap
1
Remove pad plate
2
Remove the wick cap by pulling on the side
rubber tab.
3
Replace with a new wick cap, pressing
firmly into place to create a tight seal to
prevent leaking.
4
Reintall pad plate
Roomba™ j5+ Owner's Guide
EN
9