NGS Technology GT-Challenge Manual Del Operador página 4

PS3 connection
NOTE: Please ensure that your console is turned OFF before connecting
or disconnecting the Steering Wheel.
1) Connect the wheel to PS3 console.
2) Power on PS3 console. All the LEDs begin to flash.
3) Press MODE button to connect the Steering Wheel.
4) Press and hold the MODE button for 2 seconds to enter the PS3 home
window.
5) The LED number indication on the steering wheel will represent the
player number the steering wheel is assigned to:
LED1 - 4 = Player 1-4
LED1 + 4 = Player 5
LED2 + 4 = Player 6
LED3 + 4 = Player 7
Please note: Once the steering wheel is disconnected from the USB port of
the PS3 or the PS3 console is restarted or switched off you will need to re-
connect the steering wheel.
PC
1. System Requirement
1) USB port.
2) XP & Vista.
3) DirectX version 7.0 and later.
To connect the wheel, plug the wheel's USB connector into a spare USB
port on your computer, (Note: To use a USB controller, you must be
running windows 98/98SE/ME/2000/ XP/ Vista operating systems).
2. Installation
1) Enter into Windows.
2) Insert the supplied Driver CD into your PC CD Rom.
3) Double click the SETUP icon.
4) Install the driver 'LS-USBmX1/2/3' following system prompts.
5) Connect the Steering Wheel to a USB Port on the PC.
6) Select 'Game Controllers' in the Control Panel to calibrate the steering
wheel properties.
Calibrate the wheel as described in the calibration section of the game
controller window. The USB driver will only have to be installed once, after
this has been done whenever you connect the wheel to your USB port the
"LS-USBmX1/2/3" will appear within the "Gaming Options" window. To
ensure the wheel works correctly please re-calibrate the wheel before use.
4
User's Manual