Garmin Tacx NEO Bike Plus Guia De Inicio Rapido página 11

4 Slide the handlebar onto the handlebar rail.
5 Adjust the handlebar reach, and secure the M12 x 25 handle
The maximum handlebar distance is 15 cm.
6 Use the 8 mm hex key to remove the set screw from the handlebar post.
7 Adjust the handlebar height, and secure the M16
x 22 handle .
The maximum handlebar height is 26 cm.
8 If necessary, follow these steps to adjust the
handlebar angle.
9 Use the Torx 20 to remove the handlebar cover
.
10 Use the 5 mm hex key to loosen the 4 screws.
11 Adjust the angle of the handlebar.
12 Tighten the 4 screws.
13 Replace and secure the handlebar cover.
Installing the Fans with Tablet Mount
The tablet mount is between the fans
F
(page 13).
1 Align the fans
display.
Quick Start Manual
with the back of the
.
11